Plumbing and sanitary
Ramadan Drain CleaningSanitary fixture installation in Shuhada
Sanitary fixture installation in Shuhada works with diverse housing, from villas built in the sixties and seventies to modern flats with completely different piping. Shuhada is a residential district in Hawalli, with old and new houses mixed together.
Before you buy
When a swap isnot a swap.
Four things decide whether an installation is simple or needs extra work.
01
The waste sits at a different height
Every fixture has its waste outlet at a set height. If the new toilet takes a floor outlet and yours is in the wall, or the other way round, the installation means changing the waste and not just connecting it.
02
The unit hangs on the wall
A wall hung toilet or basin is not held by tiling. Each needs a steel frame fixed into the wall behind the finish to carry the whole load, and that is decided before the tiling, not after it.
03
The new unit is a different size
A new basin may cover the old fixing holes or fall short of them, and a new toilet may be longer and stand away from the wall. Checking the dimensions before buying saves a trip back to the shop.
04
There is no valve for it
A fixture installed with no angle valve of its own means any later repair stops water to the house. A proper installation includes a valve on each supply arriving at it.
This area
What setsthis area apart
Old Shuhada villas have separate utility bathrooms and waste lines drop from iron risers beside the wall. Modern flats have integrated bathrooms and waste hidden under new flooring. If you want a new toilet or sink in an old villa, we work with heavier pipes and may need to cut metal. Newer flats have thinner, easier pipes, but we must be careful because they are hidden under the floor.
Shuhada lies in Hawalli governorate, a mixed old and new residential district with varied pipe systems depending on building age.
Old Shuhada villas have a separate utility room far from the main bathroom, so fitting a new fixture there means running a long pipe extension.
In short
The fitting work.
Service
Sanitary fixture installation and connection
The fixtures
Basins, toilets, kitchen sinks, bidet sprays, utility sinks
Included
Fixing, water and waste connection, angle valve, silicone
The old units
Removed and taken out of the way before fitting
Hours
Daily, 6:00 in the morning to 12:00 midnight
How we fit it
From measuringto running it.
The order here saves breaking, which is why we do not rush it.
We measure waste and supply
The height of the waste outlet and the positions of the supply pipes are measured against the new unit's own dimensions, before anything old comes off.
We remove and prepare
The old unit comes off, the old silicone is removed completely and the surface cleaned, because any residue stops new silicone bonding properly.
We fix and level it
The unit is fixed and levelled first, and connected second. Connecting before fixing means any later adjustment pulls on the joints and they start weeping later.
We connect, test and seal
Water and waste are connected, the unit is run, and every joint is checked under pressure. The silicone bead goes on last, once everything is proven dry.
Common questions
Questions about Sanitary fixture installation in Shuhada
Yes, but we check first that no other fixtures hang on the iron column. If it is empty, we fit new PVC, but it must be nearly the same diameter.
Old villas were built with separate rooms, water in one place and waste in another. The pipe order was simple and all fixtures clustered near the outlet close to the house.
Nearby areas
More areas for Sanitary fixture installation
Same service, in nearby areas.
Other services
Other services in Shuhada
Other work we do in the same area.
Back to Sanitary fixture installation