Plumbing and sanitary
Ramadan Drain CleaningSanitary fixture installation in Qairawaan
Sanitary fixture installation in Qairawaan, near the Seventh Ring Road, covers a residential area with flats and modest houses where water and waste connections need precise measurement and height. Qairawaan is fairly old, and its pipes are distributed in different ways.
Before you buy
When a swap isnot a swap.
Four things decide whether an installation is simple or needs extra work.
01
The waste sits at a different height
Every fixture has its waste outlet at a set height. If the new toilet takes a floor outlet and yours is in the wall, or the other way round, the installation means changing the waste and not just connecting it.
02
The unit hangs on the wall
A wall hung toilet or basin is not held by tiling. Each needs a steel frame fixed into the wall behind the finish to carry the whole load, and that is decided before the tiling, not after it.
03
The new unit is a different size
A new basin may cover the old fixing holes or fall short of them, and a new toilet may be longer and stand away from the wall. Checking the dimensions before buying saves a trip back to the shop.
04
There is no valve for it
A fixture installed with no angle valve of its own means any later repair stops water to the house. A proper installation includes a valve on each supply arriving at it.
This area
What setsthis area apart
Qairawaan has old-style apartment units and simple traditional houses, with very cramped kitchens and bathrooms. Old water and waste lines run through passages and walls, and if you decide to fit a new tap or additional outlet, we open the walls and see what is already there. The concrete ceiling in Qairawaan is not very high, so horizontal pipes sometimes sit close to head height, and we measure first before fitting anything new.
Qairawaan sits in Kuwait governorate, an older residential area near the Seventh Ring Road.
Most houses and flats in Qairawaan have old metal pipes chased through walls and ceilings.
In short
The fitting work.
Service
Sanitary fixture installation and connection
The fixtures
Basins, toilets, kitchen sinks, bidet sprays, utility sinks
Included
Fixing, water and waste connection, angle valve, silicone
The old units
Removed and taken out of the way before fitting
Hours
Daily, 6:00 in the morning to 12:00 midnight
How we fit it
From measuringto running it.
The order here saves breaking, which is why we do not rush it.
We measure waste and supply
The height of the waste outlet and the positions of the supply pipes are measured against the new unit's own dimensions, before anything old comes off.
We remove and prepare
The old unit comes off, the old silicone is removed completely and the surface cleaned, because any residue stops new silicone bonding properly.
We fix and level it
The unit is fixed and levelled first, and connected second. Connecting before fixing means any later adjustment pulls on the joints and they start weeping later.
We connect, test and seal
Water and waste are connected, the unit is run, and every joint is checked under pressure. The silicone bead goes on last, once everything is proven dry.
Common questions
Questions about Sanitary fixture installation in Qairawaan
Yes, but we open the wall first and check what pipes and voids already exist. If the existing line is old or troubled, we ask you to replace it along with the new sink.
We measure the existing line and calculate whether it can handle the extra water. If not, we run additional pipes from the tank or the main line.
Nearby areas
More areas for Sanitary fixture installation
Same service, in nearby areas.
Other services
Other services in Qairawaan
Other work we do in the same area.
Back to Sanitary fixture installation