Plumbing and sanitary
Ramadan Drain CleaningSanitary fixture installation in Mirqab
Sanitary fixture installation in Mirqab means reliable taps and basins for flats and newer builds near the Central Market and Mirqab Mall. The area is old and mixed with aging blocks and new construction, so fittings are carefully fitted to suit the existing base.
Before you buy
When a swap isnot a swap.
Four things decide whether an installation is simple or needs extra work.
01
The waste sits at a different height
Every fixture has its waste outlet at a set height. If the new toilet takes a floor outlet and yours is in the wall, or the other way round, the installation means changing the waste and not just connecting it.
02
The unit hangs on the wall
A wall hung toilet or basin is not held by tiling. Each needs a steel frame fixed into the wall behind the finish to carry the whole load, and that is decided before the tiling, not after it.
03
The new unit is a different size
A new basin may cover the old fixing holes or fall short of them, and a new toilet may be longer and stand away from the wall. Checking the dimensions before buying saves a trip back to the shop.
04
There is no valve for it
A fixture installed with no angle valve of its own means any later repair stops water to the house. A proper installation includes a valve on each supply arriving at it.
This area
What setsthis area apart
Mirqab is a historic area near the Central Market and Grand Mosque with old blocks and recently rebuilt structures. Older buildings sometimes have weak foundations and thin or uneven walls, so basins and taps need special bracing or steel backing hidden in the wall. Old pipes may be rust-scored, and we may replace part of the internal line. Drainage in Mirqab uses old stacks that may be narrow or partially blocked, so we inspect the entire run before fitting any new basin.
Mirqab lies in Kuwait governorate, a historic old neighbourhood near the Central Market and Grand Mosque with aging blocks and new rebuilds.
Foundations of old buildings in Mirqab may be weak and wooden bracing can be decayed, so fixings must be heavy-duty metal, not wood.
In short
The fitting work.
Service
Sanitary fixture installation and connection
The fixtures
Basins, toilets, kitchen sinks, bidet sprays, utility sinks
Included
Fixing, water and waste connection, angle valve, silicone
The old units
Removed and taken out of the way before fitting
Hours
Daily, 6:00 in the morning to 12:00 midnight
How we fit it
From measuringto running it.
The order here saves breaking, which is why we do not rush it.
We measure waste and supply
The height of the waste outlet and the positions of the supply pipes are measured against the new unit's own dimensions, before anything old comes off.
We remove and prepare
The old unit comes off, the old silicone is removed completely and the surface cleaned, because any residue stops new silicone bonding properly.
We fix and level it
The unit is fixed and levelled first, and connected second. Connecting before fixing means any later adjustment pulls on the joints and they start weeping later.
We connect, test and seal
Water and waste are connected, the unit is run, and every joint is checked under pressure. The silicone bead goes on last, once everything is proven dry.
Common questions
Questions about Sanitary fixture installation in Mirqab
We find strong metal or concrete beneath plaster and tile and fix the basin and tap to that rather than the wall itself. If we find no solid base, we fit a special metal bracket from outside or behind, depending on space.
If the old pipe isn't fully blocked and water runs fast, we flush it and test before fitting the new tap. But if it's heavily rusted or weeping slightly, we replace that section with new pipe to prevent it clogging later.
Nearby areas
More areas for Sanitary fixture installation
Same service, in nearby areas.
Other services
Other services in Mirqab
Other work we do in the same area.
Back to Sanitary fixture installation