Plumbing and sanitary
Ramadan Drain CleaningSanitary fixture installation in Qaisariya
Sanitary fixture installation in Qaisariya means fitting newer houses and some external annexes and outbuildings. Qaisariya is a residential area in Jahra, with medium-sized villas that have some newer extensions and surrounding gardens.
Before you buy
When a swap isnot a swap.
Four things decide whether an installation is simple or needs extra work.
01
The waste sits at a different height
Every fixture has its waste outlet at a set height. If the new toilet takes a floor outlet and yours is in the wall, or the other way round, the installation means changing the waste and not just connecting it.
02
The unit hangs on the wall
A wall hung toilet or basin is not held by tiling. Each needs a steel frame fixed into the wall behind the finish to carry the whole load, and that is decided before the tiling, not after it.
03
The new unit is a different size
A new basin may cover the old fixing holes or fall short of them, and a new toilet may be longer and stand away from the wall. Checking the dimensions before buying saves a trip back to the shop.
04
There is no valve for it
A fixture installed with no angle valve of its own means any later repair stops water to the house. A proper installation includes a valve on each supply arriving at it.
This area
What setsthis area apart
Qaisariya houses are medium villas on standard plots, and water and waste lines run regularly from the main street. If you want new taps in a garden or new annex, pipes are not far and the ground is compacted asphalt or gravel so we can finish quickly. Extra bathrooms and outdoor kitchens in Qaisariya need new pipes from the main line, and most houses have one inspection chamber by the outer wall.
Qaisariya is in Jahra governorate, a residential villa area with medium-sized houses.
Inspection chambers in Qaisariya are easy to reach and close to the house boundary, and main pipes run regularly under the asphalt.
In short
The fitting work.
Service
Sanitary fixture installation and connection
The fixtures
Basins, toilets, kitchen sinks, bidet sprays, utility sinks
Included
Fixing, water and waste connection, angle valve, silicone
The old units
Removed and taken out of the way before fitting
Hours
Daily, 6:00 in the morning to 12:00 midnight
How we fit it
From measuringto running it.
The order here saves breaking, which is why we do not rush it.
We measure waste and supply
The height of the waste outlet and the positions of the supply pipes are measured against the new unit's own dimensions, before anything old comes off.
We remove and prepare
The old unit comes off, the old silicone is removed completely and the surface cleaned, because any residue stops new silicone bonding properly.
We fix and level it
The unit is fixed and levelled first, and connected second. Connecting before fixing means any later adjustment pulls on the joints and they start weeping later.
We connect, test and seal
Water and waste are connected, the unit is run, and every joint is checked under pressure. The silicone bead goes on last, once everything is proven dry.
Common questions
Questions about Sanitary fixture installation in Qaisariya
We run pipes from the main line to the garden, and Qaisariya ground is compact so we can cut and finish fast. We must check the gradient if there is also drainage.
Yes, as long as the main line is near and water comes with adequate pressure, we run the pipes and tap and finish. If you want drainage around the tap, we tie it to the main waste line.
Other services
Other services in Qaisariya
Other work we do in the same area.
Back to Sanitary fixture installation